MULTI FUNCTION DRIVE UNIT

The new multi function drive unit replaces the earlier auger drive unit A37092. Avant auger drills and screw pile adapter are mounted on it as always, but thanks to the new design the multi function drive unit can also be fitted with various new attachments: concrete mixing drum, screw cone log splitter, screening drum, cable/hose reel, carousel broom and rotary hoe.

In addition, there is a 90 degree angle adapter available on which the drive unit can be mounted. It turns the drive unit 90° to the left. This means that for instance the carousel broom sweeps on the left side of the loader, and the cable/hose reel is crosswise to the loader and winds the cable longitudinally (in parallel to the loader).

• Torque 1000 lb/ft

TECHNICAL INFORMATION

A37395 Concrete mixing drum

A37207 Screening drum

• Intended for screening of soil, gravel and sand
• Volume: 24 gal
• Screening sieve with 2x2 in holes – included also a separate 0.9x0.9 in sieve, which is bolted on the drum when finer screening is required

A37317 Carousel broom

• Same Ø 39.4 in broom as on A2971 Carousel broom
• Replacebable brush A32698
• Weight 150 lb
• Can also be mounted on the A37323 Angle adapter 90° > sweeps on the left side of the loader

A418530 Screw pile adapter

With Avant and multi function drive unit you can install screw piles in the ground quickly and easily. The screw pile adapter mounts on the multi function drive unit and fits on Ø 2.4 in screw piles. 

The adapter can be mounted on all Avant auger drives – the correct type of the auger drive depends on torque required: how hard the ground is, and dimensions of the screw pile.